arduinofft: Move to submodule, define srqt_internal externally

1 files changed, 0 insertions, 125 deletions

diff --git a/src/libs/arduinoFFT-develop/Examples/FFT_02/FFT_02.ino b/src/libs/arduinoFFT-develop/Examples/FFT_02/FFT_02.ino
deleted file mode 100644
index 7164dab1..00000000
--- a/src/libs/arduinoFFT-develop/Examples/FFT_02/FFT_02.ino
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
-
-	Example of use of the FFT libray to compute FFT for several signals over a range of frequencies.
-        The exponent is calculated once before the excecution since it is a constant.
-        This saves resources during the excecution of the sketch and reduces the compiled size.
-        The sketch shows the time that the computing is taking.
-        
-  Copyright (C) 2014 Enrique Condes
-  Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
-
-	This program is free software: you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation, either version 3 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-*/
-
-#include "arduinoFFT.h"
-
-/*
-These values can be changed in order to evaluate the functions
-*/
-const uint16_t samples = 64;
-const double sampling = 40;
-const uint8_t amplitude = 4;
-const double startFrequency = 2;
-const double stopFrequency = 16.4;
-const double step_size = 0.1;
-
-/*
-These are the input and output vectors
-Input vectors receive computed results from FFT
-*/
-double vReal[samples];
-double vImag[samples];
-
-/* Create FFT object */
-ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, sampling);
-
-unsigned long startTime;
-
-#define SCL_INDEX 0x00
-#define SCL_TIME 0x01
-#define SCL_FREQUENCY 0x02
-#define SCL_PLOT 0x03
-
-void setup()
-{
-  Serial.begin(115200);
-  Serial.println("Ready");
-}
-
-void loop()
-{
-  Serial.println("Frequency\tDetected\ttakes (ms)");
-  Serial.println("=======================================\n");
-  for(double frequency = startFrequency; frequency<=stopFrequency; frequency+=step_size)
-  {
-    /* Build raw data */
-    double cycles = (((samples-1) * frequency) / sampling);
-    for (uint16_t i = 0; i < samples; i++)
-    {
-      vReal[i] = int8_t((amplitude * (sin((i * (TWO_PI * cycles)) / samples))) / 2.0);
-      vImag[i] = 0; //Reset the imaginary values vector for each new frequency
-    }
-    /*Serial.println("Data:");
-    PrintVector(vReal, samples, SCL_TIME);*/
-    startTime=millis();
-    FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward);	/* Weigh data */
-    /*Serial.println("Weighed data:");
-    PrintVector(vReal, samples, SCL_TIME);*/
-    FFT.compute(FFTDirection::Forward); /* Compute FFT */
-    /*Serial.println("Computed Real values:");
-    PrintVector(vReal, samples, SCL_INDEX);
-    Serial.println("Computed Imaginary values:");
-    PrintVector(vImag, samples, SCL_INDEX);*/
-    FFT.complexToMagnitude(); /* Compute magnitudes */
-    /*Serial.println("Computed magnitudes:");
-    PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);*/
-    double x = FFT.majorPeak();
-    Serial.print(frequency);
-    Serial.print(": \t\t");
-    Serial.print(x, 4);
-    Serial.print("\t\t");
-    Serial.print(millis()-startTime);
-    Serial.println(" ms");
-    // delay(2000); /* Repeat after delay */
-  }
-  while(1); /* Run Once */
-}
-
-void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
-{
-  for (uint16_t i = 0; i < bufferSize; i++)
-  {
-    double abscissa;
-    /* Print abscissa value */
-    switch (scaleType)
-    {
-      case SCL_INDEX:
-        abscissa = (i * 1.0);
-	break;
-      case SCL_TIME:
-        abscissa = ((i * 1.0) / sampling);
-	break;
-      case SCL_FREQUENCY:
-        abscissa = ((i * 1.0 * sampling) / samples);
-	break;
-    }
-    Serial.print(abscissa, 6);
-    if(scaleType==SCL_FREQUENCY)
-      Serial.print("Hz");
-    Serial.print(" ");
-    Serial.println(vData[i], 4);
-  }
-  Serial.println();
-}