diff options
Diffstat (limited to 'doc/filesInReleaseNotes.md')
| -rw-r--r-- | doc/filesInReleaseNotes.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/doc/filesInReleaseNotes.md b/doc/filesInReleaseNotes.md index e9dadb24..2fdfadf4 100644 --- a/doc/filesInReleaseNotes.md +++ b/doc/filesInReleaseNotes.md @@ -18,7 +18,7 @@ This firmware is standalone, meaning that it does not need a bootloader to actua **This firmware must be flashed at address 0x00 in the main flash memory** ### Bootloader -The bootloader is maintained by [lupyuen](https://github.com/lupyuen) and is a binary version of [this release](https://github.com/lupyuen/pinetime-rust-mynewt/releases/tag/v4.1.7). +The bootloader is maintained by [lupyuen](https://github.com/lupyuen) and is a binary version of [this release](https://github.com/lupyuen/pinetime-rust-mynewt/releases/tag/v5.0.4). - **bootloader.hex** : Firmware in Intel HEX file format. @@ -42,7 +42,7 @@ This firmware is intended to be used with our [MCUBoot-based bootloader](../boot The following files are not directly usable by the bootloader: - - **pinetime-mcuboot-app.bin** : Output file of GCC containing debug symbols, useful is you want to debug the firmware using GDB. + - **pinetime-mcuboot-app.out** : Output file of GCC containing debug symbols, useful is you want to debug the firmware using GDB. - **pinetime-mcuboot-app.hex** : Firmware in Intel HEX file format. - **pinetime-mcuboot-app.bin** : Firmware in binary format. - **pinetime-mcuboot-app.map** : Map file containing all the symbols, addresses in memory,... |