diff options
Diffstat (limited to 'doc/gettingStarted/ota-gadgetbridge.md')
| -rw-r--r-- | doc/gettingStarted/ota-gadgetbridge.md | 20 |
1 files changed, 13 insertions, 7 deletions
diff --git a/doc/gettingStarted/ota-gadgetbridge.md b/doc/gettingStarted/ota-gadgetbridge.md index fe26c03b..76f99145 100644 --- a/doc/gettingStarted/ota-gadgetbridge.md +++ b/doc/gettingStarted/ota-gadgetbridge.md @@ -1,29 +1,35 @@ # Connecting to Gadgetbridge -Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device: +Launch Gadgetbridge and tap on the menu button in the top left:  -Wait for the scan to complete, your PineTime should be detected: +Press the "Connect new device" button:  +Your PineTime should appear on the list. Tap on it. + Tap on it. Gadgdetbridge will pair and connect to your device:  # Updating with Gadgetbridge -Now that Gadgetbridge is connected to your PineTime, use a file browser application and find the DFU file (`pinetime-mcuboot-app-dfu-x.x.x.zip`) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer: +Now that Gadgetbridge is connected to your PineTime, press the three dots on the device card:  -Read the warning carefully and tap **Install**: +Now press the "File Installer" button:  -Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime! - -Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used. +Select the firmware you downloaded (`pinetime-mcuboot-app-dfu-x.x.x.zip`) from the [Releases tab](https://github.com/InfiniTimeOrg/InfiniTime/releases/latest):  + +Wait for the transfer to finish. There will be a progress bar on both the watch and the phone. Your PineTime should reboot with the new version of InfiniTime! + +Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and scroll to the Firmware option and click **validate**. Otherwise, after reboot the previous firmware will be used. + + |