From ab059b90044981b0feb3f37201fcf6635d2c4e1f Mon Sep 17 00:00:00 2001 From: Eli Weiss Date: Sun, 5 Dec 2021 14:04:35 -0600 Subject: Revised documentation --- doc/SWD.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/SWD.md') diff --git a/doc/SWD.md b/doc/SWD.md index 668eaa5c..155983b3 100644 --- a/doc/SWD.md +++ b/doc/SWD.md @@ -6,7 +6,7 @@ Download the files **bootloader.bin**, **image-x.y.z.bin** and **pinetime-graphi The bootloader reads a boot logo from the external SPI flash memory. The first step consists of flashing a tool in the MCU that will flash the boot logo into this SPI flash memory. This first step is optional but recommended (the bootloader will display garbage on screen for a few second if you don't do it). Using your SWD tool, flash **pinetime-graphics-x.y.z.bin** at offset **0x0000**. Reset the MCU and wait for a few seconds until the logo is completely drawn on the display. -Then, using your SWD tool. Flash those file at specific offset: +Then, using your SWD tool, flash these file at the following offsets: - bootloader.bin : **0x0000** - image-x.y.z.bin : **0x8000** -- cgit v1.2.3-70-g09d2