From 4aaf3d06bceadb05de0d3a9b0de94e4aba215131 Mon Sep 17 00:00:00 2001 From: Riku Isokoski Date: Sat, 6 Nov 2021 14:38:11 +0200 Subject: Documentation cleanup and reorganization --- doc/gettingStarted/ota-gadgetbridge.md | 39 ++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 doc/gettingStarted/ota-gadgetbridge.md (limited to 'doc/gettingStarted/ota-gadgetbridge.md') diff --git a/doc/gettingStarted/ota-gadgetbridge.md b/doc/gettingStarted/ota-gadgetbridge.md new file mode 100644 index 00000000..971eaad0 --- /dev/null +++ b/doc/gettingStarted/ota-gadgetbridge.md @@ -0,0 +1,39 @@ +# Connecting to Gadgetbridge + +Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device: + +![Gadgetbridge 0](gadgetbridge0.jpg) + +Wait for the scan to complete, your PineTime should be detected: + +![Gadgetbridge 1](gadgetbridge1.jpg) + +Tap on it. Gadgdetbridge will pair and connect to your device: + +![Gadgetbridge 2](gadgetbridge2.jpg) + +# Updating with Gadgetbridge + +## Preparation + +All releases of InfiniTime are available on the [release page of the GitHub repo](https://github.com/InfiniTimeOrg/InfiniTime/releases). + +Release files are available under the *Assets* button. + +You need to download the DFU of the firmware version that you'd like to install, for example `pinetime-mcuboot-app-dfu-1.6.0.zip` + +## Gadgetbridge + +Now that Gadgetbridge is connected to your PineTime, use a file browser application (I'm using Seafile to browse my NAS) and browse to the DFU file (image-xxx.zip) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer: + +![Gadgetbridge 3](gadgetbridge3.jpg) + +Read carefully the warning and tap **Install**: + +![Gadgetbridge 4](gadgetbridge4.jpg) + +Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime! + +Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used. + +![Gadgetbridge 5](gadgetbridge5.jpg) -- cgit v1.2.3-70-g09d2